Rub Tester
A simple and accurate method of determining the rub and abrasion resistance of inks printed on a variety of materials.
The Teknimek Rub Tester provides a simple and accurate method of determining the rub and abrasion resistance of inks printed on a variety of materials. It will also assess the comparative transfer between surfaces. It has been designed to conform to BS 3110:1959 and being robustly constructed will provide many years of reliable service.
The printed specimen to be tested is clamped on a rubber covered fixed platen. Over this platen a rubbing block holding the plain material is moved backwards and forwards by a driving arm for a predetermined number of cycles. The machine then automatically stops and the test samples can be removed for analysis.
| Rubbing block: |
4" x 2" (10 x 5cm) with 2 pads 2" x 1" Weight 2 lbs |
| Fixed platen: |
8" x 3" (20 x 7.5cm) |
| Number of strokes: |
1-99999 |
| Stroke Length: |
2.25" (6.5cm) |
| Dimensions: |
40 x 24 x 23.5cms |
| Rating: |
220-240v, 50hz. 1A or 100-120v, 60hz 1.5A |
| Additional Weight: |
2lbs |
| Stroke Speed: |
47 cyckes.min |
| Stroke Radius: |
9" (22.5cm) |
| Weight: |
13.2kg |
For further information please download our leaflet below
